3 Valuable Tips For Minimizing Mold In Your Home
Mold is not only unsightly but, unchecked, it can also lead to a host of health problems. For those reasons, it is important to control mold before it reaches dangerous levels. If you would like to learn more about fighting mold in your home, read on. This article will present three tips for minimizing mold.
Stop mold growth by identifying plumbing leaks.
It's natural for mold to develop in places where there is an increased amount of moisture in the air--bathrooms, especially. But when you notice mold proliferating in other parts of the house, chances are it means you've got a leak of some sort on your hands.
To find the leak that's contributing to the mold, begin by turning on the nearest water source. Continue to let this water run as you check surrounding areas for any signs of leakage. Don't be discouraged if you don't find the leak right away. Remember that the water causing the mold may have traveled far from its source. Don't hesitate to check for plumbing leaks in adjacent rooms--or even floors--of your house.
Ceiling mold usually means you've got problems with your ductwork.
People are often mystified by mold that forms on ceilings, especially when there are no signs of a roof leak behind the problem. Yet ceiling mold is just as often caused by problems with the ducts above. You see, cold air passing through your ducts causes the warmer air around it to condense. Insulation is meant to keep this from happening, yet if the insulation has come loose--or was not installed properly--the result is mold-inducing moisture.
A similar thing happens in cold months. If warm air is allowed to escape--either through lack of insulation, or through unsealed joints--it will cause moisture to form in the air. Eventually this will cause dampness in your ceiling, providing the perfect breeding ground for mold. Thus it is important to have your ductwork inspected if you have noticed any signs of mold forming on the ceiling.
When in doubt, perform a mold test.
In most cases, mold is easy to recognize. Yet in its early phases it can sometimes be hard to determine whether a surface is moldy or just dirty. In order to answer this question, make a simple bleach solution using 1 part bleach to 16 parts water. This is just strong enough to kill the mold. Dip a cotton swab in your solution and press it gently against the surface. If the spot quickly disappears, you can safely assume you're dealing with mold.
If you find you have an extensive amount of black mold, contact a professional removal company, like Advanced Remediation Solutions Inc.